Maruzen - CA870 - Project Shotty |
Written by ORCA | |
{simplegrade:4} Manufacturer: Maruzen (Japan) Type: Spring Pump Shotgun Date Acquired: 12/2004 ![]() Maruzen - CA870 with TGS Stock System If you saw a previous posting on my M1100, I was planning on adding the TGS stock system to that gun, but after looking at the gas feed system and the fact that specific M1100 is no longer in production (and may never be again). I decided it would be better if I just picked up a CA870 where I knew i wouldn't bugger up a perfectly good gas system. I purchased this as a CA870 full stock. ![]() Maruzen - CA870 with TGS Stock System The CA870 itself is a good spring shotty, but it's only single shot unlike the Marui spring shotguns. if I were to skirmish with a shotgun I wouldn't take this gun though since I have a Marui Spas 12 and M1100. The fun part of this project for me is the fact all addons are from the Real Steel world. Some minor alterations were needed to the Real Steel parts to make them work. These are posted here www.honolulu888.com. Tip: The screw used for the stock is a 6mm coarse threaded screw. Hope that saves you time at the hardware store ![]() Items included in the project:
Great CA870 Upgrade info is www.honolulu888.com
Edit: Aug 31, 2006
Chrono Results (FPS) After Adding G&P Long Front Barrel
|
|
Last Updated on Friday, 23 March 2007 13:57 |